Despre sony hdr pj10

[exclusivegirl]

Exista vreun link catre un tutorial gen instalare sony hdr pj10 prin cablu hdmi ?Daca e instalata prin cablu hdmi mai am nevoie de placa de captura ?just saying...
In alta ordine de idei CUM se instaleaza sony hdr pj10 corect prin hdmi ?Multumesc:)
O seara faina!

[Smart]

Da...in principiu trebuie doar sa bagi cablul HDMI in placa de captura care este necesara. Mai sunt niste setari de facut pentru calitate dar asta este o alta discutie. Pentru detalii sunt disponibil pe PM.

[Adrian]

Buna Exclusive,

Pe scurt pe scurt, ai placa de captura Hd una compatibila gen Avermedia o montezi instalezi in PC ( instalezi drivere etc) iei cablul HDMI de la camera video si il bagi in portul HDMI de pe placa de captura, HDMI si nu AV_IN (ai grija ca nu cumva sa il bagi in hdmi de la placa video este posibil ca sa aibe si ea asa ceva)
Dupa care pornesti camera si

- put it in HD Mode (not standard mode),
- go to Hdmi Output settings and make sure that you choose 720p (on some cameras the option is displayed fully like 1280x720, on other models might appear along with other sizes, for example like this: 480p/720p),
- connect the camera with the HDMI cable on the HDMI port of your HD Capture Card (check on capture card to be sure you connect it to the HDMI, not analog - some capture cards have 2 hdmi ports, one is for Analog RCA or Svideo the other is for HD Hdmi connection). Now we end up in the PC with a resolution of 1280x720 16:9 format, we need to transform this image into a 4:3 one, 640x480 or 800x600 (standard high quality resolutions of major cam sites for the time when this text was written - February 2013).
- To transform the image, Webcamsplitter or Webcamsplitter Pro can be used, other splitting software might work as well like e2eSoft Vcam, you can test several popular splitter software and see which does the best job for you. It's important that the software to be able to manipulate the video that comes from capture card and to be able to send it further to the cam site to a different size/format, and Webcamsplitter has these options (also e2eSoft Vcam).
- So you load your HD Capture Card device in the Webcamsplitter, you setup a resolution of 1280x720, after that you right click on Webcamsplitter icon, and press on Options, a window with settings will appear, go to Output resolution and press on Customize button, in the list of resolutions select 640x480 and 800x600, you can deselect the rest of resolutions.
- These settings means that the Webcamsplitter will take image from capture card at 1280x720 and it will send it further at reduced size and different format at 640x480 or 800x600. Now if the image is distorted on the cam site, from the same Options page of Webcamsplitter you select Crop, and the software will cut the image margins, to transform it from wide to normal 4:3 format, this way your image will no longer be distorted.
http://www.Xlovecam.com

Da exista un tutorial facut este pe siteul Xlovecam.com , lumea nu prea stie de el sau cei care stiu tac ca nu cumva sa se afle sursa lor de inspiratie.

Daca nu te descurci iti voi raspunde.
Spor acolo

[exclusivegirl]

Buna Exclusive,

Pe scurt pe scurt, ai placa de captura Hd una compatibila gen Avermedia o montezi instalezi in PC ( instalezi drivere etc) iei cablul HDMI de la camera video si il bagi in portul HDMI de pe placa de captura, HDMI si nu AV_IN (ai grija ca nu cumva sa il bagi in hdmi de la placa video este posibil ca sa aibe si ea asa ceva)
Dupa care pornesti camera si

- put it in HD Mode (not standard mode),
- go to Hdmi Output settings and make sure that you choose 720p (on some cameras the option is displayed fully like 1280x720, on other models might appear along with other sizes, for example like this: 480p/720p),
- connect the camera with the HDMI cable on the HDMI port of your HD Capture Card (check on capture card to be sure you connect it to the HDMI, not analog - some capture cards have 2 hdmi ports, one is for Analog RCA or Svideo the other is for HD Hdmi connection). Now we end up in the PC with a resolution of 1280x720 16:9 format, we need to transform this image into a 4:3 one, 640x480 or 800x600 (standard high quality resolutions of major cam sites for the time when this text was written - February 2013).
- To transform the image, Webcamsplitter or Webcamsplitter Pro can be used, other splitting software might work as well like e2eSoft Vcam, you can test several popular splitter software and see which does the best job for you. It's important that the software to be able to manipulate the video that comes from capture card and to be able to send it further to the cam site to a different size/format, and Webcamsplitter has these options (also e2eSoft Vcam).
- So you load your HD Capture Card device in the Webcamsplitter, you setup a resolution of 1280x720, after that you right click on Webcamsplitter icon, and press on Options, a window with settings will appear, go to Output resolution and press on Customize button, in the list of resolutions select 640x480 and 800x600, you can deselect the rest of resolutions.
- These settings means that the Webcamsplitter will take image from capture card at 1280x720 and it will send it further at reduced size and different format at 640x480 or 800x600. Now if the image is distorted on the cam site, from the same Options page of Webcamsplitter you select Crop, and the software will cut the image margins, to transform it from wide to normal 4:3 format, this way your image will no longer be distorted.
http://www.Xlovecam.com

Da exista un tutorial facut este pe siteul Xlovecam.com , lumea nu prea stie de el sau cei care stiu tac ca nu cumva sa se afle sursa lor de inspiratie.

Daca nu te descurci iti voi raspunde.
Spor acolo

Buna
Deci daca NU am placa de captura de nici un fel ci DOAR HDMI direct in placa de baza nu merge facuta instalarea ???thats my question ....
Thx

[Adrian]

Buna
Deci daca NU am placa de captura de nici un fel ci DOAR HDMI direct in placa de baza nu merge facuta instalarea ???thats my question ....
Thx

Raspunsul este NU, nu ai cum sa captezi fara placa de captura/tvtuner ... ce ai tu acolo este un port HDMI out de la placa video ... daca este Out nu are cum sa capteze semnal de aceea se foloseste placa de captura.

Spor acolo

[exclusivegirl]

Buna
Deci daca NU am placa de captura de nici un fel ci DOAR HDMI direct in placa de baza nu merge facuta instalarea ???thats my question ....
Thx

Raspunsul este NU, nu ai cum sa captezi fara placa de captura/tvtuner ... ce ai tu acolo este un port HDMI out de la placa video ... daca este Out nu are cum sa capteze semnal de aceea se foloseste placa de captura.

Spor acolo

Uffff merci mult